Microsoft Neubau MK8 | München

The slot diffuser VZ-15 is a linear diffuser with a system width of 15 mm, especially well suited for nearly invisible incorporation into ceiling panels and shadow joints as a single diffuser or as a continuous run. The diffuser can be used for supply as well as exhaust air and is suited for constant and variable volume flows in rooms with ceiling heights from 2,70 m to 4,00 m at temperature differences of +10 K and -12 K.

The slot diffuser VZ-41 is a linear diffuser with a system width of 41 mm, especially well suited for wall and ceiling mounting. The diffuser is available in single- and multi-slot configurations and is suited for continuous assembly. The slot diffuser consists of extruded aluminium profiles with or without side support as well as rotatably mounted, individually adjustable air guiding elements with rectifier blades and boomerang profiles. The slot diffuser VZ-41 can be used for supply as well as exhaust air (also as a combined supply and exhaust air diffuser with parallel rails) and is especially suited for constant and variable volume flows in rooms with ceiling heights of 2,30 meters to 4,00 meters. The recommended flow rate is between 50 m³/h and 150 m³/h per meter at temperature differences of +4 K to -12 K.

The slot diffuser RBF is a linear diffuser with a system width of 22 mm, intended for wall and ceiling mounting. The diffuser can be manufactured with one to four slots suitable for modular or continuous runs.

The tube diffuser VZ-AR consists of a longitudinally welded jacket tube with lengthwise arranged slots with integrated air guiding nozzles in form of double boomerang profiles with rectifier blades. The possible amount of parallel slot-rows is mainly limited by its dimensioning. The connection of single tube diffusers to a string is accomplished via a spigot with lip seal, alternatively with METU-flanges. The tube diffusers are designed for visible installation and fulfill the highest of architectural and ventilation demands. The exhaust air variant consists of a tube diffuser with a longitudinally welded jacket tube with a round VZ-AR-AL cross section with cross to the longitudinal axis punch-outs. The dimensions of the models are determined depending on the exhaust air volume.

DSM are design elements made of drawn stainless steel in different forms and arrangements of the structural edges that are welded invisibly to the support profiles. A variety of different free flow areas are available, making it possible adapting to specific needs. The elements can be created in rectangular, round or arched forms in flat or three-dimensional structures with a vertical or horizontal arrangement of the individual pieces.

The long throw jet diffuser is suitable for providing cold and warm air at high throw distances and low sound power levels. The throw distance is further enhanced when combining multiple nozzles into groups. Installation can be done in multiple ways.